Model |
GD8048JMH |
GD11048JMH |
||
Input |
Phase |
L N PE |
||
Nominal Voltage |
208/220/230/240VAC |
|||
Voltage Range |
154-264VAC±3V(Normal Mode) 185-264VAC±3V(UPS Mode) |
|||
Frequency Range |
50Hz/60Hz(Adaptive) |
|||
Output |
Rated Power |
8000W |
11000W |
|
Output Voltage(AC) |
208/220/230/240VAC±5% |
|||
Output Frequency |
50/60Hz±0.1% |
|||
Waveform |
Pure sine wave |
|||
Transfer Time( Optional) |
10ms for computer , 20ms for home appliances |
|||
Peak power |
|
|
||
Overload |
"Battery Mode:1min@102%~110% Load 10s@110%~130% Load 3s@130%~150% Load 200ms@>150% Load" |
|||
Peakefficiency (battery mode) |
>94% |
>94% |
||
Battery |
Rated voltage |
48Vdc |
48Vdc |
|
Constant voltage charging voltage (Optional) |
56.4Vdc |
56.4Vdc |
||
Floating charge voltage (Optional) |
54Vdc |
54Vdc |
||
Charger |
PV charging method |
Double MPPT |
Double MPPT |
|
PV max input power |
5500W 5500W |
5500W 5500W |
||
MPPT tracking range |
120~450Vdc |
120~450Vdc |
||
Max PV input voltage |
500Vdc |
500Vdc |
||
Max PV charging current |
80A 80A |
80A 80A |
||
Max AC charging current |
80A 80A |
80A 80A |
||
Max charging current |
80A 80A |
80A 80A |
||
Display |
LCD display |
Operating mode/load/input/output, etc. |
||
Communication port |
RS232 |
5PIN/Pitcstrong.0mm, baud rate 2400 |
||
Expansion & configuration port |
"2 ×5PIN/Pitcstrong.54mm, lithium battery BMS WIFI card, dry contact card, |
communication card, etc." |
||
Parallel interface |
Optional |
Optional |
||
Environmental parameters |
Operating environment temperature |
0~40℃ |
||
Operating environment humidity |
20%~95%(Non condensing) |
|||
Storage temperature |
-15~60℃ |
|||
Altitude |
"The altitude should not exceed 1000m, derating above 1000m, up to 4000m, refer to IEC62040" |
|||
noise |
≤ 50db |
|||
Certifications |
EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 |